Mit-ivy umanga whakarewa Akerangi Kiriata Latex Sealing Tuatahi me te mana kikii tino pai
Tono
He pai te piri atu ki nga tira maitai me nga timatanga e rite ana ki te wai, me nga mea tino pai o te tinana me te miihini i muri i te maroke o te ngaru peita.
5. Ko te kiriata peita he pai te tiaki i te rama me te tiaki tae i muri i te maroke.
Te tono kua taunakitia He pai mo te aarai parepare o nga taraka, nga miihini, nga taputapu umanga ngawari, me etahi atu e hiahiatia ana he tiaki nui.
Rorohiko Hangarau tae Tae
Te maroke o te mata (50% te he) 15 ℃ C <1h ； 25'C <0.5h
Maroke Mārō (50% haumākū) 15'C <48h; 25 ° C <24h
Patu "kg.cm" 50
Te wai (50 ± 5μm) Ko te kiriata peita 72h kaore e pupuhi, kaore e awhina i te hinga, kaore i te waikura.
Te pakeke 0.3 (taarua taarua) taonga miihini whakamatautau kiriata matotoru (23 ± 3jμm)
Adhesion (Hegelian) Taumata 1
Maimoatanga Mata Ko te mata o nga mea paninga kia kore he makuku, hinu, waikawa waro me te pungarehu.
Taipitopito Tere
Te maitai me te kiri waikura: Te pupuhi pupuhi, te kirikiri ranei i te onepu penei i te tukatuka ki te taumata Sa2.5, kaore e taea te mahi i te kirikiri kirikiri kia oro miihini ranei
Tukinahia he matū hei tango i nga pakihiwi pakaru katoa e rere ana.
Te maitai me te kore he kiri waikura: he kirikiri (he pupuhi) ki te Sa2.5 te whakaohooho-a-hau ranei, nga taputapu huri hiko ki te St3.
Te paiherea, te tapahi mura, te whakatika ahi ranei mo nga waahanga o te kopu kua wera: te huri ki te taumata St3.
He papanga papaa me te kiriata peita tawhito: tangohia nga korakora peita tawhito me te waikura, me te onepu ki te St3 me te hau, te taputapu hiko hiko ranei.
Ka taea te whakamahi i te peita peita angamaheni me te H902 tiimatanga-a-wai, ka whakamahia noa hei peera whakapaipai whaanui, ka whakamahia ranei me etahi atu momo hua tuatahi (me whakarite kia whakaukia).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
